Square Stanchions: General Information

General    Ordering    Detail    Photos
Single-Station Square Stanchions
Access Device Stanchions in four standard configurations, made with the finest finish in mind as well as strength. Choose from a selection of finishes from stainless steel to powder coating of your choice. These stanchions are generally used to support large housings, although they can be used wherever a more substantial appearance is desired. Made of 3 square steel tubing, they have a flange to receive a housing with a mating 3 square post hole pattern. An 8-square baseplate welded on the bottom allows the stanchions to be attached to concrete using anchor bolts (not included). A 2-part, snap together, steel baseplate cover is provided to conceal the mounting hardware.

Dual-Station Square Stanchions
These stanchions are used at vehicular access points serving both cars and trucks. They are made of 3 square steel tubing, with an 8 square baseplate welded on the bottom and housing flanges provided at two locations to support housings with mating 3 square post hole patterns. Dual Station Stanchions include all the same benefits as Single Station shown above. Stanchions with the lower housing flange at a height of 35 are normally installed on a raised island or curb. Stanchions with the lower flange at a height of 43 are usually mounted on the same surface as the traffic they serve.



Click here to view Square Stanchion Ordering Guide.
Click here to view Square Stanchion Detail Information.
Click here to view Square Stanchion Photos.